Preparation and Testing Work Before the Sealing Machine is Used

The sealing machine equipment adopts four-roller sealing, which has fast sealing speed, low noise and better sealing quality. It has a simple and compact structure, easy operation and maintenance, small size, lightweight and low noise. It can seal cans of large and small diameters by replacing a few parts. It is widely used in the sealing of pop-top cans, paper cans, plastic cans and metal cans. , ideal equipment for food factories and canning factories.

The can seal machine uses the current environmentally friendly glass bottles to cap and seal the glass bottles with three-screw and four-screw caps that have relatively high requirements on the vacuum degree in the bottle. Vacuuming and then capping to extend the shelf life of the bottle contents and enhance the taste without heating to keep the color of the material unchanged. Implement automatic bottle feeding, automatic capping, and automatic vacuuming.

Preparatory work before starting the sealing machine:

1. Before the new machine is used, the power supply should be equipped with an electromagnetic safety switch to reduce the danger due to power failure.

2. Pay attention to the steering of the motor. If the steering is wrong, you can change the wiring position of any second wire among the three wires to change the steering.

3. The new machine should pay attention to the adjustment of the automatic tank removal system. The sealing machine adjusts the nut under the "foot pedal", so that when the "foot pedal" is stepped down, the "pushrod" makes the lower edge of the "can support shaft cam" and the upper edge of the "roller" form a tangent line: Moderate. If the distance between the two is insufficient, the roll seal cannot be activated. If the distance between the two is too large. If the sealing is repeated, the cans cannot be automatically removed, or the strength of the cans is uneven, resulting in slipping cans. Support the "can holder shaft" with one hand, and loosen the "can holder shaft adjustment clamping screw" with a wrench with the other hand. Step on the "foot pedal" to raise the "can tray". Place an empty can, and adjust the distance between the top of the "can tray" and the upper end of the protrusion of the "rolling head", which is the height of the uncapped can minus 1/8". At this time, the "clamping screw" can be fixed.

Zhejiang Golden Eagle Food Machinery Co., Ltd. not only produces can making machines but also Tin can make machinery production line and other products, welcome to visit our official website.